Supply HA bearing heater one, HA-bearing heater uses: HA-bearing heater http://www.hyjxcn.com mainly used for bearings, gears, bushings, sleeve diameter rings, pulleys, contractile ring , connectors and other types of metal is heated by heating the expansion needs of surplus reached assembly. Two, HA-bearing heater advantages: saving money, saving 90%, saving 100%, saving the plant covers an area of ??70% 2-saving, productivity increased by more than four times the 60% reduction in operating personnel. 3 reliable, uniform heating, absolutely clean, help to improve the quality of assembly. 4 Safety no fire hazards. 5. Environmental protection, oil-free petrol air pollution, help improve the environment and the health of workers. Three, HA bearing heater structure: HA-type control box by a combination of host and integrally mounted in the primary car, mobile structure, flexible and easy to use on-site construction, removable yoke is directly used to wear a sleeve bearing or other heating workpiece purposes. Four, HA-bearing heater Note: 1, power supply ground wire must be good. 2, the host is not placed in front of the yoke, non-press the start button switch, otherwise it will damage the instrument or blown fuses. 3, ball bearing heater temperature not exceeding 150 ℃. Otherwise it will cause bearing annealing. 4, in order to improve the heating efficiency of the bearing bore to select the appropriate size according to a yoke, a larger cross-sectional area should be selected yoke. 5, the host must be laid flat not skewed, the end face of the yoke shall be consistent with the host. 6, must be powered down when the host, before taking the yoke of the heating element. 7, the bearing temperature, the amount of up described with reference to the aperture. Related Recommended: Rama http://www.hyjxcn.com/pro10-2.html jack http://www.hyjxcn.com